An integrated approach for assessing the migration behavior of chlorpyrifos and carbaryl in the unsaturated soil zone

Chlorpyrifos (O, O-diethyl O-3,5,6-trichloropyridin-2-yl phosphorothioate) and carbaryl (1-naphthyl methylcarbamate) are often applied concurrently as insecticides in food production. The aim of this study was to research their migration behavior in a real environment. We researched the leaching of both pesticides by setting up field lysimeters on a farm with the typical soil used in fruit production today. In order to analyze the variables involved in this process, we performed complementary adsorption studies, we performed complementary adsorption studies using batches and undisturbed soil laboratory columns for both compounds. The results for pesticide transport through the lysimeters showed that less than 1% of chlorpyrifos was recovered in the leachates, while almost 17% was recovered for carbaryl. Having completed the experiment in undisturbed laboratory columns, soil analysis showed that chlorpyrifos mainly remained in the first 5 cm, while carbaryl moved down to the lower sections. These results can be explained in view of the sorption coefficient values (K_D) obtained in horizons A and B for chlorpyrifos (393 and 184 L kg^?1) and carbaryl (3.1 and 4.2 L kg^?1), respectively. By integrating the results obtained in the different approaches, we were able to characterize the percolation modes of these pesticides in the soil matrix, thus contributing to the sustainable use of resources.     

脱硫吸收塔系统常见故障分析及处理

脱硫系统的发生的故障主要是吸收塔系统出现的异常工况，分析吸收塔系统浆液循环泵叶轮磨损、浆液泵出口母管堵塞、吸收塔内浆液异常等对吸收塔出口参数的影响，并提出了各种异常现象发生时的解决方法，为减少脱硫系统故障，确保烟气达标排放提供参考。     

Laboratory investigation of Waelz slag stabilization

Electric Arc Furnace dusts are considered hazardous waste due to their high heavy metals content (zinc, lead, etc.). The Waelz process is one of the most efficient technologies, in terms of capacity and quality, able to recover nearly the 90% of zinc contained in such EAF dusts. Unfortunately, the resulting slag still has eco-compatibility problems, although its mechanical and chemical properties are suitable for civil engineering applications. Stabilization tests, by quartz addition, were performed on EAF dusts in a laboratory furnace. Temperature, treatment time and cooling rate were varied in order to define the best conditions for regulating the formation of a stable microstructure able to hinder the release of substances. Microstructural characterization was carried-out using SEM and XRD analysis. Leaching tests were performed according to EN 12457-2 standards and water analyses were performed using ICP-OES. The best chemical stability was achieved when dust powders were mixed with 20% of silica and water-cooled.     

CePO4-TiO2固溶体的NH3-SCR活性

采用共沉淀法合成了不同Ce与Ti摩尔比的CePO₄-TiO₂复合材料,利用XRD、TEM、NH₃-TPD和H₂-TPR技术对其物理化学性质进行了表征,并对其NH₃-SCR活性进行了评价。实验结果表明：随着CePO₄含量的增加,催化剂的活性提高;当Ce与Ti的摩尔比为8:2时催化剂的活性最高,230 ℃的NO转化率达到100%,且具有更广的温度窗口,优于纯CePO₄。表征结果显示,CePO₄与TiO₂形成固溶体后,颗粒尺寸较为均匀,强酸位的数量增多,氧化还原性能提升,从而提高了催化剂的SCR反应活性,同时改善了其抗水抗硫性能。     

基于BP神经网络优化制备Cu-Ce/TiO_2及其光催化活性研究

采用Cu和Ce对TiO2进行改性,基于正交实验设计和BP神经网络研究了Cu-Ce/TiO2中Cu-Ce对TiO2的摩尔百分数、Cu-Ce/TiO2中CuCe摩尔比及Cu-Ce/TiO2烧结温度对Cu-Ce/TiO2光催化降解甲醛溶液性能的影响.同时,对Cu-Ce/TiO2制备方案进行了优化,并运用X射线衍射仪、扫描电子显微镜和紫外-可见分光光度计对最佳条件下制备的Cu-Ce/TiO2进行表征.结果表明,优化的制备条件为Cu-Ce/TiO2中Cu-Ce对TiO2的摩尔百分数为2.88%,Cu-Ce/TiO2中Cu-Ce的摩尔比为1∶1,Cu-Ce/TiO2的烧结温度为570℃.共掺杂Cu离子和Ce离子能有效避免掺杂TiO2晶格内部表层和近表层产生较多的位错,从而抑制晶格畸变增大;诱导TiO2中锐钛矿型晶体向金红石型晶体转变的能力增强,有效抑制电子-空穴对的复合,产生介电局域效应.     

活性炭纤维对于离子的电吸附选择性能研究

通过循环伏安测试、交流阻抗测试、电吸附实验等方法研究了单组分和多组分溶液中不同离子在活性炭纤维电极表面的选择性电吸附性能。结果表明,电吸附选择性能与离子的水合半径、离子价态、离子浓度有关;增大初始浓度可以提高电吸附容量;并且,由于强烈的选择吸附作用,Ca2+离子可以吸附取代其它已经被吸附的离子。     

有效磷含量对硝酸铵溶液热安全性的影响

为了了解硝酸磷肥生产过程中,硝酸铵溶液中加入磷酸一铵的安全性,通过自制实验装置,研究了有效磷含量对质量分数为85%的硝酸铵溶液热分解的影响。结果表明,质量分数为85%的硝酸铵和磷酸一铵混合溶液的临界爆炸温度高于纯质量分数为85%的硝酸铵溶液,稳定性更好;磷酸一铵抑制硝酸铵的热分解,随着有效磷含量的增加,硝酸铵混合溶液临界爆炸温度升高;升温速率对硝酸铵混合溶液的临界爆炸温度影响很大,随着升温速率由2℃/min升高到3℃/min,质量分数为85%的硝酸铵混合溶液的临界爆炸温度升高,不易发生爆炸,安全性更好。研究结果对硝酸磷肥的生产安全有一定的指导意义。     

NaOH溶液吸收CO2的试验研究

为了满足国际海事组织对船舶CO2排放的要求,建立了一种针对船舶尾气CO2的循环吸收系统,利用NaOH溶液吸收CO2.NaOH溶液完成第一步吸收反应后在第二步反应中被还原,从而可以循环利用.分析了初始反应温度、NaOH浓度及溶液中的Na2CO3对CO2吸收率的影响,并计算了循环反应中NaOH的再生率和CaO的过量系数.结果表明,CaO过量系数为1.2时对CO2固化效果最佳,此时NaOH溶液再生率达79.31％.研究表明,NaOH溶液吸收船舶尾气中CO2的循环系统效率高、成本低.     

Antimony leaching release from brake pads: Effect of pH,temperature and organic acids

Metals from automotive brake pads pollute water, soils and the ambient air. The environmental effect on water of antimony (Sb) contained in brake pads has been largely untested. The content of Sb in one abandoned brake pad reached up to 1.62 × 10⁴ mg/kg. Effects of initial pH, temperature and four organic acids (acetic acid, oxalic acid, citric acid and humic acid) on Sb release from brake pads were studied using batch reactors. Approximately 30% (97 mg/L) of the total Sb contained in the brake pads was released in alkaline aqueous solution and at higher temperature after 30 days of leaching. The organic acids tested restrained Sb release, especially acetic acid and oxalic acid. The pH-dependent concentration change of Sb in aqueous solution was best fitted by a logarithmic function. In addition, Sb contained in topsoil from land where brake pads were discarded (average 9 × 10³ mg/kg) was 3000 times that in uncontaminated soils (2.7 ± 1 mg/kg) in the same areas. Because potentially high amounts of Sb may be released from brake pads, it is important that producers and environmental authorities take precautions.     

生物滴滤塔处理模拟甲硫醚废气

在常温条件下,采用生物滴滤塔处理模拟甲硫醚废气,考察了气体空床停留时间(EBRT)、容积负荷、喷淋密度及营养液pH对生物滴滤塔性能的影响。实验结果表明:当EBRT为90 s、进气甲硫醚质量浓度为150 mg/m~3、喷淋密度为0.65 m~3/(m~2·h),营养液pH为6.8时,甲硫醚去除率为90%;容积负荷高于15 g/(m~3·h)时,对生物滴滤塔的性能产生抑制作用;EBRT为90 s及60 s时,最佳喷淋密度分别为0.56~0.65 m~3/(m~2·h)及0.65~0.75 m~3/(m~2·h);降解甲硫醚的微生物对pH的变化较敏感,最适营养液pH为6~7。